Raspberry Pi Touch Display 2 Gets 10-Inch Model at $80
The 10-inch model is the largest in the Touch Display 2 line, adding a 1200x1920 resolution and 10-finger touch support that the 5 and 7 inch models do not have.
Reporting from 1 source: GIGAZINE.
GIGAZINE reviewed the 10-inch Raspberry Pi Touch Display 2, announced July 22, 2026 at $80. The display has a 10.1-inch active area, 1200x1920 resolution, an 85-degree viewing angle, and 10-finger touch support, up from 5-finger touch on the 5 and 7 inch models. It weighs 480g and works with all Raspberry Pi models from 1B+ onward except the Zero series.
The boxed display ships with mounting screws, a data cable, and a power cable. Its bezel is about 16mm wide, roughly matching the 7-inch model. The display panel is thin while the rear section bulges to hold the connectors and screw holes for a Raspberry Pi board. At a measured 480g it is heavy enough to notice but light enough to hold one-handed, and the review finds it suits both handheld tablet use and fixed display setups.
Synthesized by Yomimono from the 1 cited source below, including Japanese-language reporting where cited, then editorially reviewed before publishing.